•  Call Us: 0871 8118112

Sata / SAS / eSATA Cards

  • Per page
  • Items 1 to 10 of 32

  •    

  1. IDE-SATA-SI - Dynamode Bi-directional IDE to SATA Adapter
    Dynamode Bi-directional IDE to SATA Adapter
    SKU: 1022 | MPN: IDE-SATA-SI
    £4.66

    • Discrete PCB for direct Storage Device attachment
    • Needs no Drivers, converts at 'Boot Time'
    • Single 40-Pin IDE Port; Two SATA Ports
    • Single 4-Pint Power Connector
    • Converts SATA to Parallel ATA
    • Converts Parallel ATA to SATA
    • Supports ATA100/133 Specification
    • Fully compliant with Serial ATA Specifications
    • Unique activity LED on PCB
    • Bundled 'Molex' Power Cable and SATA Data Cable

  2. Lycom DT-118 M.2 NGFF SATA to 7Pin SATA Converter
    Lycom DT-118 M.2 NGFF SATA to 7Pin SATA Converter
    SKU: 6138 | MPN: DT-118
    £7.18

    • M.2 NGFF SATA 2260-xx-B-M 75Pin PCBA module
    • Supports M.2 NGFF type 2260 and 2242 plated-hole
    • 7 pin SATA connector on board
    • Supports any type of SATA III, SATA II and SATA I Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk)
    • Transparent to the operating system and no driver required
    • Supports any OS like Windows, Mac and Linux
    • Supports industrial operating temperature range: -40 - 85 ºC
    • RoHS Compliant

  3. Lycom ST-157 Convert SATA SSD to 2.5” 44Pin IDE Horizontal Slim Converter - Fitting Room Required
    Lycom ST-157 Convert SATA SSD to 2.5” 44Pin IDE Horizontal Slim Converter - Fitting Room Required
    SKU: 5292 | MPN: ST-157
    £10.78

    • Support any type of SATA SSD or 2.5” device 
    • 44Pin 2.0mm 2.5” HDD IDE male connectors on board 
    • Attached to SATA SSD and 2.5” HDD directly 
    • Compliant with Serial ATA 2.6 
    • Supports Serial ATA Generation 2 transfer rate of 3Gbps 
    • Support Master, Slave and Cable Select Modes by jumper setting 
    • ATA/ATAPI PIO mode data transfer 
    • ATA/ATAPI UDMA data transfer rate of 150, 100, 66, 44, 33, 25, 16.7 MB/s 
    • Tag Command Queuing (Max 32 entries) 
    • SATA Hot-plug 
    • SATA Power Save modes 
    • ATA/ATAPI-7 Streaming feature set 
    • 100% hardware bridge converter to support PC, MAC and Linux environment 
    • Supports SSD larger than 137GB. 
    • Fully RoHS Compliant

  4. Lycom ST-170m mSATA SSD to 1.8” SATA Adaptor
    Lycom ST-170m mSATA SSD to 1.8” SATA Adaptor
    SKU: 4340 | MPN: ST-170m
    £10.92

    • Convert mSATA SSD to 1.8” SATA Form Factor
    • 22 pin SATA (Signals and Power) male connector on board
    • 100% Compatible with 1.8” SATA drive mechanical spec
    • The mSATA SSD can be the primary bootable device containing the OS and application.
    • Includes 2 screws for the retention of mSATA module
    • Transparent to the operating system and does not require any drivers
    • Supports any OS like Windows, Mac and Linux
    • Fully RoHS compliant

  5. ST-168mL-7 - Lycom Latch and Retain mSATA SDD as 7mm 2.5" SATA Drive
    Lycom ST-168mL-7 Latch and Retain mSATA SDD as 7mm 2.5" SATA Drive
    SKU: 5293 | MPN: ST-168mL-7
    £11.04

    • Convert Full Size mSATA SSD to 2.5” Form Factor
    • Supports SATA I, SATA II and SATA III (6Gbps)
    • 100% Compatible with 2.5” SATA drive mechanical spec
    • 22 pin SATA (Signals and Power) male connector on board
    • The mSATA SSD can be the primary bootable device containing the OS and application.
    • Latch type mSATA connector on board, no need the screw for the retention of mSATA SSD
    • Transparent to the operating system and no driver required
    • Supports any OS like Windows, Mac and Linux
    • Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws
    • Dimension of PCBA with 2.5” frame : 100.45mm x 69.85mm x 7mm
    • Supports industrial operating temperature range: -40 - 85 ºC
    • Fully RoHS compliant

  6. ST-139F - Lycom Convert 2x2.5" Sata into a 3.5" SATA Raid Drive 3.5" form factor (inc Metal Rails)
    Lycom ST-139F Convert 2x2.5" Sata into a 3.5" SATA Raid Drive 3.5" form factor (inc Metal Rails)
    SKU: 5298 | MPN: ST-139F
    £14.40

    •  3Gbps SATA II high transfer rate
    •  H/W Raid 0 double the SSD reading performance to the world fastest drive
    •  Work with SATA II or SATA I or USB2.0 Host Port
    •  22Pin SATA connector and 5Pin USB2.0 Pin Header for host connection
    • Two 22 pin SATA (Signals and Power) female connector on board to 2.5” SSD or HDD
    • Support Hardware Raid 0 (FAST, Stripping) and Non-Raid (2 Drives) modes
    • Easy Hardware RAID setting by Jumper
    • Supports NCQ
    • Hot-plug and ATAPI support
    • Complies with USB 2.0 specification transfer rate 480 Mb/s
    • Compatible with USB OHCI / UHCI / EHCI hosts
    • Mandatory SMART commands available
    • Includes a set of metal frame and screws that convert dual 2.5” drives to a 3.5” Drive form factor
    • 100% OS-transparent hardware converter to support PC, MAC and Linux, no driver required
    • RoHS compliant

  7. Lycom ST-166 Mainboard IDE to SATA Drives x2 Slim Converter Adapter
    Lycom ST-166 Mainboard IDE to SATA Drives x2 Slim Converter Adapter
    SKU: 4343 | MPN: ST-166
    £16.78

    • SATA II 3Gbps controller
    • Solidly Convert one mother board IDE host to two SATA drives connection
    • Supports SATA III, SATA II and SATA I Device
    • Supports 48 bits LBA
    • Compliant with Serial ATA 2.6
    • Tag Command Queuing (Max 32 entries)
    • SATA Power Save modes
    • ATA/ATAPI PIO mode data transfer
    • ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
    • ATA/ATAPI-7 Streaming feature set
    • 100% OS-transparent hardware bridge converter to support Windows, MAC and Linux, no driver required
    • Fully RoHS compliant

  8. ST-125 - Lycom 4 Port HDD Controller, 3 Int Ports, 1 Ext Port, Inc Dual PCI Brackets
    Lycom ST-125 4 Port HDD Controller, 3 Int Ports, 1 Ext Port, Inc Dual PCI Brackets
    SKU: 1464 | MPN: ST-125
    £35.39

    • 1. PCI
    • Compliant with PCI Specification, revision 2.3
    • Supports 66 MHz PCI with 32-bit data
    • Internal application interface multiplexed to 4 ports
    • All registers appear in unified memory space
    • Full-chip command completion status accessible with single PCI burst access
    • I/O port access to register space
    • Low Profile PCI form factor

    • 2. High Speed Serial ATA
    • Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
    • Hot-plug capability
    • Supports Serial ATA Generation 2 transfer rate of 3.0 Gb/s
    • Supports SATA II First-party DMA commands for Native Command Queuing (NCQ)
    • Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1
    • Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
    • Supports four independent Serial ATA channels
    • Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
    • 31 Commands and Scatter/Gather Tables per Port
    • Supports bootable drive
    • Four Pin header on board for LED connection
    • RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
    • JBOD is a virtual disk that combines all disk drives as one entire disk drive
    • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
    • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
    • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
    • Completely with drivers for Windows 2000 ,XP and 2003 Server
    • Supports 64bit / 32bit Windows Vista
    • Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE9.0 SP2, SuSE9.0 SP3 by SiliconImage SiI3124.
    • Fully RoHS compliant

  9. ST-126RM - Lycom SATA II 3Gbps 1-To-5 Port Multiplier bridge board Perfect for Rack Mounts
    Lycom ST-126RM SATA II 3Gbps 1-To-5 Port Multiplier bridge board Perfect for Rack Mounts
    SKU: 0268 | MPN: ST-126RM
    £35.98

    • 1-to-5 native SATA II Port Multiplier.
    • Shielded and durable eSATA connector for host connection.
    • Full support for FIS-based switching and command-based switching SATA host controllers.
    • Advanced data aggregation architecture for ultra-fast read and write operations with FIS-based switching controllers.
    • LED Pin Headers for Host & 5 devices & Power on & System Ready.
    • Auto-negotiation support for 1.5Gbps and 3.0Gbps SATA.
    • Compliant with SATA II external specification.

  10. Mac Os eSATA card The Highpoint R622M Rocket Dual eSATA 6Gb/s
    Highpoint Rocket 2 port eSATA 6Gb/s For Mac via PCI-e v2.0
    SKU: 5378 | MPN: R622M
    £86.51

    • SATA 6Gb/s
    • PCI-Express 2.0 x1
    • Industry Standard AHCI compliant
    • Hot Plug capability
    • SMART
    • eSATA Hot Swap
    • System Requirements: Mac Pro 2006 to Newest ; Mac OS X 10.4.x or later

  • Per page
  • Items 1 to 10 of 32

  •