• Discrete PCB for direct Storage Device attachment
• Needs no Drivers, converts at 'Boot Time'
• Single 40-Pin IDE Port; Two SATA Ports
• Single 4-Pint Power Connector
• Converts SATA to Parallel ATA
• Converts Parallel ATA to SATA
• Supports ATA100/133 Specification
• Fully compliant with Serial ATA Specifications
• Unique activity LED on PCB
• Bundled 'Molex' Power Cable and SATA Data Cable

• M.2 NGFF SATA 2260-xx-B-M 75Pin PCBA module
• Supports M.2 NGFF type 2260 and 2242 plated-hole
• 7 pin SATA connector on board
• Supports any type of SATA III, SATA II and SATA I Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk)
• Transparent to the operating system and no driver required
• Supports any OS like Windows, Mac and Linux
• Supports industrial operating temperature range: -40 - 85 ºC
• RoHS Compliant

• PCI Compliant Rev 2.2, 32-Bit Plug n' Play
• RAID 0 (striped), RAID 1 (mirror), RAID 0+1
• ATA/ATAP6-6, UDMA6 ATA/133 Compliant
• Supports different HDD sizes under single RAID set
• Supports co-exist RAID set and Non-RAID HDD
• Ultra ATA/66, Ultra ATA/33, EIDE/Fast ATA2, IDE support
• Supports ATAPI, CD-ROM, DVD-ROM, LS-120, ZIP drives
• Maximum transfer rate up to 133MB/Sec
• Supplied with Software Drivers and Utilities
• Compatible with Windows® 98/ME/2000/XP/Vista, Linux®

• Support any type of SATA SSD or 2.5” device 
• 44Pin 2.0mm 2.5” HDD IDE male connectors on board 
• Attached to SATA SSD and 2.5” HDD directly 
• Compliant with Serial ATA 2.6 
• Supports Serial ATA Generation 2 transfer rate of 3Gbps 
• Support Master, Slave and Cable Select Modes by jumper setting 
• ATA/ATAPI PIO mode data transfer 
• ATA/ATAPI UDMA data transfer rate of 150, 100, 66, 44, 33, 25, 16.7 MB/s 
• Tag Command Queuing (Max 32 entries) 
• SATA Hot-plug 
• SATA Power Save modes 
• ATA/ATAPI-7 Streaming feature set 
• 100% hardware bridge converter to support PC, MAC and Linux environment 
• Supports SSD larger than 137GB. 
• Fully RoHS Compliant

• SATA II 3Gbps controller
• Solidly Convert one mother board IDE host to two SATA drives connection
• Supports SATA III, SATA II and SATA I Device
• Supports 48 bits LBA
• Compliant with Serial ATA 2.6
• Tag Command Queuing (Max 32 entries)
• SATA Power Save modes
• ATA/ATAPI PIO mode data transfer
• ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
• ATA/ATAPI-7 Streaming feature set
• 100% OS-transparent hardware bridge converter to support Windows, MAC and Linux, no driver required
• Fully RoHS compliant