Dimensions:W: 125 mm H: 63.5 (+17.1) mm D: 100 mm

4 Pin + 12V Power Connector for Pentium4

Complies with FCC Part 15 J class B

115 VAC Operation and CISPR22 230 VAC Operation

Meets EN60950 and UL 1950, CSA 22.2 Level 3 Requirements

Over Voltage / Under Voltage / Over Power / Short Circuit Protection

100% Hi-pot & Function (Chroma) Tested

100% Burn-in Under High Ambient Temperature (50¢XC)

MTBF Over 100,000 Hrs. at 25¢XC

Low Noise & Ripple

--------------------

Specification

Temperature Range:10~50 ¢XC Operating, -40~70 ¢XC Non-Operating

Hold-up Time:< 16.6 ms at Full Load & Normal Input Voltage

Dielectric Protection:1800 VAC for 1 sec.

Humidity:5~95% RH

Efficiency:68% min, 72% typical @ Full Load

Power Good Signal:On Delay 100~500 ms, Off Delay 1 ms

Overload Protection:100~150% Load

Over Voltage Protection:All Outputs have Short Circuit Protection

Inrush Current:30A (RMS) max for 115 VAC, 60A (RMS) max for 230 VAC

Remote Sensing:+3.3 V

Cooling Fans:8 cm DC Fan