The Kaze Master Fan Controllers are possibly the best looking fan controllers ever to grace our product range. When switched off, they look like a plain bezel apart from the dials. It is only when they are switched on that you see any type of display.

The display shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Masters can! So if you only want a fan to run under certain circumstances then these could be your ideal fan controllers

As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.

As you can see from the pictures above, there are two sizes of fan controller available. To help you decide which one is suitable for your needs, you need to ask yourself a few questions. Firstly, how many fans do you need to control? If the answer is no more than two then the 3.5inch fan controller will be the best solution. However, if you want to control up to four fans then the 5.25inch version is ideal. The second question is what size drive bay(s) do you have free? Some cases are supplied with only one 3.5inch drive bay and therefore if you are already using a 3.5inch device, (like a card reader) then it would not be possible to use the 3.5inch version. If that is the situation then the 5.25inch fan controller is the way forward, just as long as you have a spare 5.25inch drive bay!

--------------

Features

Manual fan speed controller with temperature sensors

Controls up to four 3-pin or 4-pin (PWM) fans

Fail safe alarm - alarm sounds if fan fails

Able to completely stop the fan, if desired

Looks “fan"-tastic!

--------------------

Specification

Dimension: 103 x 25 x 93 mm (WxHxD)

Display Dimension: 60 x 15.5 mm

Fan Channel: Two

Temperature Module Channel: Two

Weight: 125g

DC Input 5V or 12V (from PSU)

Fan Adjustment Range 3.7V - 12V

Maximum Fan Amp 1A per channel

Fan Speed Range 0 - 7500 RPM (Display Range: 30rpm Incremental)

Temperature Range 0 - 100°C / 32 - 199.9°F

Measurement Frequency Every two seconds